Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
January 22, 2018, 05:02:54 AM
 
Pages: [1]
  Print  
Author Topic: Side Repeaters not working  (Read 325 times)
0 Members and 1 Guest are viewing this topic.
Llywelyn1984
Hero Member
*****

Karma: 0
Posts: 239



« on: October 04, 2016, 01:18:50 PM »

Hi All,

1.  Are side repeaters now working an mot fail?

2.  They dont work.  Bulbs are fine.  When i join the ground from the bulb holder directly to the battery they work fine.  All the other indicators work fine.

Is this a bad ground problem like i think?  Does any know where is the ground on the side indicators?  They disappear off somewhere. 

(I have changed the ground straps recently but as everything else seems fine i think this is a red herring?  I just have one going to gearbox for the starter motor and one old strap from the gearboxy part to the middle of the chassis.  Ive taken out the one from the chassis rail to the gearbox. )
Logged
Llywelyn1984
Hero Member
*****

Karma: 0
Posts: 239



« Reply #1 on: October 06, 2016, 08:47:09 AM »

Anyone...driving me crazy this.
Logged
Dell Boy
Ultimate Enthusiast
********

Karma: 17
Posts: 2344


« Reply #2 on: October 06, 2016, 02:37:54 PM »

Connection to both is behind the dash in the far left hand corner. Have you checked the bulbs? If fitted they have to work for the m.o.t. You possibly could get away with neatly blanking over them with duct tape so they dont exist.

Derek. 
Logged

Dell Boy - The Rascal Specialist
Llywelyn1984
Hero Member
*****

Karma: 0
Posts: 239



« Reply #3 on: October 06, 2016, 08:28:18 PM »

Dell boy you are a bl88dy legend!
Found the wiring and on the connector to one wire in the electrical block is a load of blue of corroded wire!
its too dark now but i cant wait to attack it!!
Logged
Llywelyn1984
Hero Member
*****

Karma: 0
Posts: 239



« Reply #4 on: October 09, 2016, 08:17:03 PM »

Well the connector turned out to be fine, but I made a new ground by lengthening the ground cable from the connector in the corner to the bulk head.
I'm not sure where the actual ground goes, I lost it behind the steering wheel.
Anyway side lights working now.
Logged
Pages: [1]
  Print  
 
Jump to: