Load of bull

[marc4242]

Is there much to fitting bull bars?  At the moment my spare is inside the campervan.  For those of you with a pick up, where does the sparfe usually go?

[>>CHOP<<]

The spare sits behind the rear registration plate (which is on pivots) it hangs in a cradle from under the flat bed....just above the petrol tank....

dont know about the nudge bars...never had any...

[marc4242]

Thanks chop, the campervan pod overhangs the back so that explains why it can't be mounted.  Now I just need to know how of a deal it is to fit nudge bars ...

[Matty]

 hi mate, my bull bars were a real doddle.  They came with a couple of brackets and you need to remove 4 bolts on the underside of the van (2 on each side), hold the bars in place and replace the bolts.  As soon as you hold the bars in position it will be obvious which bolts you need to fit them with.  If you can't figure it out i can always post up a picture for you.

[>>CHOP<<]

matty ...take a picture anyway and post it on "how to guides" for future reference..i

[Matty]

Good idea Chop!  Have now posted pics in how to section.

[Dell Boy]

You usually need to replace the four bracket fixing bolts with longer ones when fitting bully bars. Derek.