Distributor Baseplate Earth Wire

[jen]

Does anyone have one going spare?

When I fitted the simonbbc electronic ignition I threw it away because it looked tatty and made my own.
Trouble is that the normal wire connectors I am using are too big, so the wire is in an S-shape and has not lasted long.

[duncanamps]

I don't have one, but if you have difficulty getting hold of one can I offer a suggestion?

If you want to make some extra flexy wire to cover this off, get a bit of TV coaxial cable and strip off a couple of inches of the outer braid.  Pull this from each end until it's the thickness you need.  This will last a lot longer than say, normal 7 or 16 core equipment/hookup wire on something like a distributor baseplate which is moving almost continuously.

[>>CHOP<<]

Hi i have an old dizzy somewhere ....i will have a look for you..do you have a picture of the part in question..?