hubs

[WOMBLE]

 :)me again  wot size socket gets the hub bolts of my suzy thanks womble

[>>CHOP<<]

Now then .....that is a question...and if i knew the answer i would tell you...but i dont...looks to me to be about 35mm but im only guessing....i would go out and measure it for you but i have just got out of the bath...i have a better idea ..why dont you go out and measure it..its not rocket science...or have you just got out of the bath and thought to yourself...mmmmmm i wonder what size nut holds the wheel hub on..i will ask the lads and lasses on rascalenthusiasts.com...to see if they know......wot are you like...lol

 if nobody has replied to your question by tomorrow night ...i will go out and measure it tomorrow...just for you...hows that...

[TITCH]

CHOP, DON'T HAVE A BATH TOMORROW NIGHT!!!!

[aussi suzi]

Try a shifter spaner or you call them a wrench...ken

[>>CHOP<<]

Hears me thinking ..50 members ..ahaa sombody will tell poor old uncle bulgaria..the answer to that question...at some point someone will be helpfull to a fellow member in need ...(even though he could go and measure it himself)...or is it just me being a soft touch.and daft enough to ..go and do it.....OH AYE i have ..i have had a bath too...got all comfortable ..reached for mi laptop switched it on ...got here and was deeply dissapointed to discover that nobody.....AYE NOBODY had told ORINOCO the answer....so off i toddled in mi jammy bottoms ...its............                       30mm

[>>CHOP<<]

Try a shifter spaner or you call them a wrench...ken

we call them ..an   adjustable spanner....(or wrench or movable)

[TITCH]

Isn't it a hammer??
I thought any tool held in the hand was a hammer (metal object)

[>>CHOP<<]

im with you titch ....if its closer than the actual real thing....then yes its a hammer

[aussi suzi]

When ever i re grease my front hub bearings,i refit the hub ,outer bearing ,install thrust washer and do the hub nut up with a shifter just enough to remove any free play and then back off nut with my shifter until the split pin hole lines up,place new split pin and hand test for free play,this is all done with my shifter spaner...doing it this way for 32 years...I wasnt being a smart a--- when i mentioned in previous reply to use a shifter...ken

[>>CHOP<<]

Hey..theres nothing wrong with using a shifter(adjustable spanner).we were just saying they are very versatile...mine gets used for most jobs too...including  hammer . pry bar . wrecking bar . door stop .

[Dell Boy]

Hi Chop,                                            I don`t reply to some requests `cos I feel with a tiny effort requestee`s could find the information themselves. I.E. Take a ruler & measure the nut just like you did. Most have a manual but wont open it for fear of getting it dirty. I will help anybody who makes an effort to do something & gets stuck but I will not do the job for them. Derek.